PRODUCT

AIM Raised Access Floor Barrier prevents the passage of flame and smoke through the under floor cavity, for at least the period of fire rating specified. AIM Raised Access Floor Barrier is made from high density Rockwool stone wool slab, faced with Class 0 impervious foil facing on both sides. It is available cut to size or in slabs suitable for cutting on site.

---

APPLICATIONS

Raised Access Floor Barriers are required for four applications (requirements for fire barriers):

1 - Subdivision of large uninterrupted cavities

To comply with Building Regulations - 30 minutes’ integrity plus 15 minutes insulation. The AIM Raised Access Floor Fire Barrier meets and exceeds the requirements of Approved Document Part B (in England and Wales) as well as the fire safety sections of other UK Building Regulations’.

---

2 - Alignment under a partition, to maintain partition rating

i) 30 minute partition - 30 minutes’ integrity plus 30 minutes’ insulation

ii) 60 minute partition - 60 minutes’ integrity plus 60 minutes’ insulation.

iii)120 minute partition - 120 minutes’ integrity plus 120 minutes’ insulation

---

3 - Reduce flanking transmission of sound

The AIM Raised Access Floor Barrier can be used to reduce flanking transmission of sound through the void it fills by at least 21 dB RW

---

4 - Plenum Applications

The AIM Raised Access Floor Barrier can also be used to help create a Plenum chamber under a raised access floor system.

---

PHYSICAL INFORMATION

• Length: 1000mm
• Widths: 75mm, 100mm & 125mm (depending on the fire rating required)
• Voids: 50 - 400mm (barrier to be compressed by 5%)
• Available cut to size and supplied with the required fixing clips
• Available in slab form for cutting on site as required
• Foil faced (see options)
• Also available Polythene sleeved
• Thermal Conductivity l = 0.036W/mK