Tenmat FF102/25 Ventilated Cavity Fire Barrier
An open state cavity fire barrier for use horizontally within uninsulated, ventilated and drained cavities of up to 25mm
PRODUCT DESCRIPTION
The FF102/25 Ventilated Cavity Fire Barrier, is manufactured from low smoke zero halogen high expansion intumescent material and is designed to reinstate fire resisting performance to external wall cavities that are required to be ventilated (open-state) in non-fire conditions.
The FF102/25 is manufactured from a rigid intumescent material allowing it to be provided in a strip format, it is also covered with a protective layer of aluminium foil for ease of handling and increased durability. In the event of a fire the FF102/25 intumescent material will expand to close the external wall cavity, providing effective fire resistance, for integrity and insulation for up to 60 minutes depending upon the construction of the external walls.
The FF102/25 is designed for use within a designed 25mm cavity, and once installed will close the remaining free air gap (in front of the 4mm cavity barrier) of 21mm.
DIMENSIONS
4mm (thick) x 35mm (wide) x 1000mm (long)
Tenmat's FF102/25 Ventilated Cavity Fire Barrier is held in stock by AIM and available in quantities starting from a single unit (transport charges may apply on small orders).
PRODUCT INFORMATION
- A fire rated product designed to act as an external wall cavity barrier at the junction of compartment floors, within uninsulated cavities
- Tested and proven to reinstate the fire resistance performance within “open-state” external wall cavities for periods up to 60 minutes, for both integrity and insulation to the principles of EN 1363-1 and in accordance with ASFP TGD 19 guidance
- Ventilated design – developed to allow maximum ventilation of cavities reducing the need for cavity trays or weepholes
- Suitable for “open-state” ventilated cavities up to 25mm wide
- Provided in strips of 1m long, 35mm wide and 4mm thick
- Lightweight - designed to be easily and quickly installed
- No maintenance required after installation
TECHNICAL INFORMATION
Please refer to Tenmat Technical datasheet for FF102/25 Ventilated Cavity Fire Barrier. Alternatively call the Tenmat technical department on +44 161 872 2181.
ORDERING
To order this product the following information will be required:
- Approximate quantity
- Delivery location
Tenmat's FF102/25 Ventilated Cavity Fire Barrier is held in stock by AIM and available in quantities starting from a single unit (transport charges may apply on small orders).
Please contact our sales office for further details.
There is no minimum order quantity or value although small orders may attract transport surcharges.
TECHNICAL SUPPORT
Technical Support is available from our experienced sales team on 01293 582 400 or [email protected]
Our Partners & Affiliates
